When soldering copper pipe, the wire solder should be touched to ...

[mynx]

When soldering copper pipe, the wire solder should be touched to the pipe surface once the flux starts to _____.
 
  A) melt
  B) cool
  C) bubble
  D) harden

Question 2

When using a handheld tube cutter to cut copper tubing, the step performed immediately after making the cut
  is to _____.
 
  A) measure the tubing
  B) remove any burrs from the tubing
  C) bend the tubing to the proper angle
  D) solder the cut end of the tubing

[skipfourms123]

Answer to Question 1

Answer: C

Answer to Question 2

Answer: B

[mynx]

Thanks for the timely response, appreciate it

[CAPTAINAMERICA]

YES! Correct, THANKS for helping me on my review