Author Question: On a starting relay, the component can be tested to see if it is electrically acceptable using a ... (Read 38 times)

Caiter2013 · **on:** Jul 24, 2018

On a starting relay, the component can be tested to see if it is electrically acceptable using a standard ________ or capacitance meter.

A) multimeter B) ammeter C) ohmmeter D) voltmeter

Question 2

The three major electrical defects in compressor motors that can be identified using an ohmmeter are:

A) Single-phasing, dual-phasing, and three-phasing.
B) Open, shorted, or grounded.
C) Phased, unbalanced, or blown.
D) Locked, under capacity, and unbalanced.