This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: How do you know when to stop applying solder? A) The solder will draw all the way around the ... (Read 140 times)

WhattoUnderstand

  • Hero Member
  • *****
  • Posts: 517
on: Jul 24, 2018
How do you know when to stop applying solder?
 
  A) The solder will draw all the way around the joint.
  B) The solder will run out of the top of the joint when it is full.
  C) The solder will stop flowing into the joint.
  D) When solder balls form on both sides of the joint, you are done.

Question 2

What does a crankcase pressure regulator do?
 
  A) It maintains a positive crankcase pressure by bypassing small quantities of discharge gas into the crankcase.
  B) It maintains the oil pressure in the compressor crankcase.
  C) It will not allow the compressor suction pressure to drop below the CPR setpoint.
  D) It will not allow the compressor suction pressure to rise above the CPR setpoint.


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

nyrave

  • Sr. Member
  • ****
  • Posts: 344
Reply #1 on: Jul 24, 2018
Answer to Question 1

A

Answer to Question 2

D


WhattoUnderstand

  • Hero Member
  • *****
  • Posts: 517
Reply #2 on: Jul 24, 2018
TY


nyrave

  • Sr. Member
  • ****
  • Posts: 344
Reply #3 on: Jul 24, 2018
You're welcome


« previous next »
 

Did you know?

In the ancient and medieval periods, dysentery killed about ? of all babies before they reach 12 months of age. The disease was transferred through contaminated drinking water, because there was no way to adequately dispose of sewage, which contaminated the water.

Did you know?

In most climates, 8 to 10 glasses of water per day is recommended for adults. The best indicator for adequate fluid intake is frequent, clear urination.

Did you know?

The first monoclonal antibodies were made exclusively from mouse cells. Some are now fully human, which means they are likely to be safer and may be more effective than older monoclonal antibodies.

Did you know?

Anesthesia awareness is a potentially disturbing adverse effect wherein patients who have been paralyzed with muscle relaxants may awaken. They may be aware of their surroundings but unable to communicate or move. Neurologic monitoring equipment that helps to more closely check the patient's anesthesia stages is now available to avoid the occurrence of anesthesia awareness.

Did you know?

Elderly adults are living longer, and causes of death are shifting. At the same time, autopsy rates are at or near their lowest in history.

Stop Codon Stop Codon
Techniques for applying local anesthesia: (a) topical; (b) infiltration; (c) nerve block; (d) spinal Techniques for applying local anesthesia: (a) topical; (b) infiltration; (c) nerve block; (d) spinal
After connecting the shutoff tool, start the engine and operate all accessories. Stop the engine ... After connecting the shutoff tool, start the engine and operate all accessories. Stop the engine ...
Stacking the joints. A. Correct thumb–wrist alignment for applying direct pressure. B. Incorrect ... Stacking the joints. A. Correct thumb–wrist alignment for applying direct pressure. B. Incorrect ...
Bracing the head while applying pressure to the neck. Bracing the head while applying pressure to the neck.
Lightly squeeze along each finger applying pressure first near the knuckle and then moving along the ... Lightly squeeze along each finger applying pressure first near the knuckle and then moving along the ...
Video: Insulin (glucose uptake by body cells), glycogenesis and lipogenesis

For a complete list of videos, visit our video library