When replacing the oil pump on a rotary compressor, position the coupling half on the pump shaft so the axial spacing between the coupling halves is ________ inch, or as specified by the manufacturer.
A) 3/4 B) 3/16 C) 3/8 D) 3/32
Question 2
In the modern refrigeration cycle, the compressor:
A) Pumps low-pressure, low-temperature vapor to high-pressure, high-temperature vapor.
B) Increases the pressure of the liquid refrigerant so that it will circulate through the system.
C) Reduces the pressure of the liquid from the condenser to the evaporator.
D) Transfers heat to the outdoor air.
Hand position for palpation for posterior thorax excursion
Half Full or Half Empty
The fuel pickup tube is part of the fuel sender and pump assembly.
The small arrows indicate the air bypassing the throttle plate in the closed throttle position. ...
Correct wrist position while performing compression. A. Correct wrist position for compression ...