[Answered] How many microns are there in an inch? A) 1,000 B) 25,400 C) 2,500 D) ...

This topic contains a solution. Click here to go to the answer

Author Question: How many microns are there in an inch? A) 1,000 B) 25,400 C) 2,500 D) ... (Read 44 times)

Melani1276

Hero Member
Posts: 516

on: Jul 24, 2018

How many microns are there in an inch?

A) 1,000 B) 25,400 C) 2,500 D) 760,000

Question 2

As a mixture travels through an evaporator, the liquid percentage:

A) Increases greatly. B) Increases slightly. C) Decreases. D) Stays the same.

Need homework help now?

Ask unlimited questions for free

Ask a Question

Marked as best answer by a Subject Expert

heinisk01

Sr. Member
Posts: 329

Reply #1 on: Jul 24, 2018

Answer to Question 1

B

Answer to Question 2

C

Melani1276

Hero Member
Posts: 516

Reply #2 on: Jul 24, 2018

heinisk01

Sr. Member
Posts: 329

Reply #3 on: Jul 24, 2018

You're welcome

« previous next »

Did you know?

Urine turns bright yellow if larger than normal amounts of certain substances are consumed; one of these substances is asparagus.

Did you know?

Every 10 seconds, a person in the United States goes to the emergency room complaining of head pain. About 1.2 million visits are for acute migraine attacks.

Did you know?

The average office desk has 400 times more bacteria on it than a toilet.

Did you know?

Looking at the sun may not only cause headache and distort your vision temporarily, but it can also cause permanent eye damage. Any exposure to sunlight adds to the cumulative effects of ultraviolet (UV) radiation on your eyes. UV exposure has been linked to eye disorders such as macular degeneration, solar retinitis, and corneal dystrophies.

Did you know?

It is believed that the Incas used anesthesia. Evidence supports the theory that shamans chewed cocoa leaves and drilled holes into the heads of patients (letting evil spirits escape), spitting into the wounds they made. The mixture of cocaine, saliva, and resin numbed the site enough to allow hours of drilling.

snout is just over 100 microns wide

The most commonly used socket drive sizes include 1/4, 3/8, and 1/2 inch drives.

A typical battery-powered 3/8 inch drive impact wrench.

The technician is using a feeler gauge that is onethousandth of an inch thinner and another ...

Since 1991, General Motors engines have been equipped with slightly (1/8 inch or 3 mm) longer spark ...

To test for a leak, this tester was set to the 0.020 inch hole and turned on. The ball rose in the ...

Author Question: How many microns are there in an inch? A) 1,000 B) 25,400 C) 2,500 D) ... (Read 44 times)

Related Topics

Need homework help now?