Author Question: The depth of infeed or downfeed per pass in truing should be no more than: A) .010 in. B) .001 ... (Read 17 times)

cagreen833 · **on:** Jul 26, 2018

The depth of infeed or downfeed per pass in truing should be no more than:

A) .010 in. B) .001 in. C) .00001 in. D) .0001 in.

Question 2

On a grinding wheel rotating clockwise, the correct position for the single point diamond in a dresser is:

A) Vertical and directly on the center line
B) Pointing in the direction of rotation 15 degrees past the center line
C) At a 15 degree angle directly on the vertical center line
D) Pointed in the direction of rotation 15 degrees ahead of the center line