The preferred hacksaw blade pitch for cutting off very thin wall ...

[jwb375]

The preferred hacksaw blade pitch for cutting off very thin wall tubing is:
 
  A) 14 tooth B) 18 tooth C) 24 tooth D) 32 tooth

Question 2

Ceramic tools should be used:
 
  A) On any lathe setup B) For low speeds only
  C) For interrupted cutting D) When excessive wear is evident on carbides

[patma1981]

Answer to Question 1

C

Answer to Question 2

D

[jwb375]

TYSM

[nguyenhoanhat]

Thanks for the timely response, appreciate it