What is a chip trap?
A) Too many chips are allowed to accumulate in the chip pan and on the floor, making a dangerous chip trap for the operator
B) A wad of stringy chips wrapped around the chuck or workpiece is know as a chip trap
C) A chip trap is simply a chip disposal device
D) An improperly ground tool or one that has been re ground many times often has a chip trap that prevents a smooth flow of chips across the tool face
Question 2
When assembling a gage block stack with assembly screws:
A) A torque screwdriver should be used
B) Tighten one and one-half turns to displace any air in the wringing interval
C) Gage blocks need not be wrung as the screw will hold them together
D) Use any available screwdriver
First Camera Trap Photos of Rare Leopard in China
The Phonognatha graeffei or leaf-curling spider's web serves both as a trap and as a way of mak
The Expanding Chocolate Chip Cake Analogy
An intake manifold gasket that failed and allowed coolant to be drawn into the cylinder(s).
Fish and chips
A gene chip carrying the human gene set. This chip can be used to diagnose genetic disorders