Author Question: On a 25 division inch vernier height gage, the vernier is coincident at the 17th line. If the beam ... (Read 106 times)

maegan_martin · **on:** Jul 26, 2018

On a 25 division inch vernier height gage, the vernier is coincident at the 17th line. If the beam scale reads 3.75, the total reading would be:

A) 3.733 B) 3.766 C) 3.7517 D) 3.767

Question 2

The end or edge of a tool may be set up with a protractor to cut a taper. What kinds of tapers may be made by this method?

A) Short and slight angles B) Very short, at any angle
C) Long and slight angles D) Any angle and moderately long