This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: Internal threads that are cut with a single point tool should have a bore size equal to: A) D = ... (Read 68 times)

anjilletteb

  • Hero Member
  • *****
  • Posts: 569
on: Jul 26, 2018
Internal threads that are cut with a single point tool should have a bore size equal to:
 
  A) D = major D - 2  basic thread height  percent of thread
  B) The minor diameter of the internal thread
  C) The minor diameter of the external thread
  D) P  .541 inch

Question 2

A 3/4 inch diameter 10 TPI Unified nut with a class 2 tolerance would be properly written as:
 
  A) 3/4 - 10 TPI UNF -2B B) 3/4 - 10 UNC - 2B
  C) 3/4 ten TPI Unified -Tol 2 D) 3/4 - 10 UNC - 2A


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

BAOCHAU2803

  • Sr. Member
  • ****
  • Posts: 316
Reply #1 on: Jul 26, 2018
Answer to Question 1

B

Answer to Question 2

B


anjilletteb

  • Hero Member
  • *****
  • Posts: 569
Reply #2 on: Jul 26, 2018
TY


BAOCHAU2803

  • Sr. Member
  • ****
  • Posts: 316
Reply #3 on: Jul 26, 2018
You're welcome


« previous next »
 

Did you know?

In most climates, 8 to 10 glasses of water per day is recommended for adults. The best indicator for adequate fluid intake is frequent, clear urination.

Did you know?

Nearly 31 million adults in America have a total cholesterol level that is more than 240 mg per dL.

Did you know?

The liver is the only organ that has the ability to regenerate itself after certain types of damage. As much as 25% of the liver can be removed, and it will still regenerate back to its original shape and size. However, the liver cannot regenerate after severe damage caused by alcohol.

Did you know?

According to animal studies, the typical American diet is damaging to the liver and may result in allergies, low energy, digestive problems, and a lack of ability to detoxify harmful substances.

Did you know?

The term pharmacology is derived from the Greek words pharmakon("claim, medicine, poison, or remedy") and logos ("study").

Your Culture and Your Point of View Your Culture and Your Point of View
Examples of internal controls. Examples of internal controls.
The bore and stroke of pistons are used to calculate an engine’s displacement. The bore and stroke of pistons are used to calculate an engine’s displacement.
The J2534 pass-through reprogramming system does not need a scan tool to reflash the PCM on most ... The J2534 pass-through reprogramming system does not need a scan tool to reflash the PCM on most ...
Internal structures of the eye Internal structures of the eye
A certain car traveling at 34.0 mph skids to a stop in 29 meters from the point where the ... A certain car traveling at 34.0 mph skids to a stop in 29 meters from the point where the ...
Video: Carbon fixing adaptations Animation

For a complete list of videos, visit our video library