Author Question: A style A tool set at 90 degrees to the axis of the work with a .030 inch feed will produce a chip ... (Read 68 times)

jayhills49 · **on:** Jul 26, 2018

A style A tool set at 90 degrees to the axis of the work with a .030 inch feed will produce a chip thickness of ________ in.

A) .015 B) .060 C) .003 D) .030

Question 2

Standard screwdrivers will slip and damage the slot if:

A) The hardness or temper has been drawn out by overheating
B) The point is misshapen
C) The blade is too narrow or too wide
D) All of the above