When clamping parts with finished surfaces in a bench vise:
A) Soft jaws should be used
B) A cheater should be used on the handle to gain leverage
C) They should be gripped very lightly so that rough jaws will not mar finished surfaces
D) They should be gripped very lightly so the smooth surface will not cause it to slip out of the jaws
Question 2
What is the greatest disadvantage of spray-mist systems?
A) They require a return hose and tank
B) They spray the whole machine instead of the work/tool area
C) They do not lubricate the tool and work area very well
D) They are messy
Sun-tracking behaviour of the arctic plant, Dryas integrifolia, heats the reproductive parts of its
Many plastic intake manifolds are constructed using many parts glued together to form complex ...
A partial stream sampling exhaust probe being used to measure exhaust gases in parts per million ...
Inflammation of the oropharynx and petechiae (small red spots) on the soft palate caused by strep ...
A good disinfecting solution you can make yourself consists of 1 part bleach to 10 parts water.
Spreads and soft-gel tablets containing plant sterols and stanols