Author Question: The power wire for an electric furnace should be A) No larger than 10 AWG in order to avoid ... (Read 151 times)

AEWBW · **on:** Jul 27, 2018

The power wire for an electric furnace should be

A) No larger than 10 AWG in order to avoid voltage drop
B) 12 AWG in most cases
C) Sized to handle the minimum circuit ampacity on the data plate
D) The same wire gauge as the internal wiring in the furnace

Question 2

Some manufacturers recommend a ________ hour standing pressure test before evacuation.

A) 24 B) 12 C) 2 D) 6