The burner assembly and furnace cabinet should be grounded for safety and because:
A) The indoor blower motor will not operate unless the unit is grounded.
B) The transformer will not operate unless the unit is grounded.
C) Most control boards for direct spark ignition or hot surface igniters will not operate correctly unless the unit is grounded.
D) The induced draft fan motor will not operate unless the unit is grounded.
Question 2
Too much primary air or will cause:
A) Higher-than-normal temperature rise. B) Flame rollout.
C) Delayed ignition. D) The high limit to open.
An indoor mould fungus.
It is important that parents repeat safety rules to preschoolers and monitor compliance with rules.
Spline cam phaser assembly.
Using a vacuum hose and a grounded test light to ground one cylinder at a time on a DIS. This works ...
A typical fuel-pump module assembly, which includes the pickup strainer and fuel pump, as well as ...
A gasoline direct-injection (GDI) fuel rail and pump assembly with the electric pressure control ...