Totem-pole outputs ________.
A) can be connected in series when higher output voltages are required
B) can be connected in parallel when higher output currents are required
C) can be connected together to handle higher load currents and output voltages
D) cannot be connected together because high currents can damage one or both of the transistors if the outputs are in opposite states (one HIGH and one LOW)
Question 2
Class C amplifiers can have efficiencies of
A) close to 75 B) very close to 100 C) better than 50 D) close to 90
Longer regions have more crossovers and thus higher recombinant frequencies
Urine output.
Don Gray, Stone #2, from the series Nine Stones.
MAP sensors use three wires: 1.5 volt reference from the PCM 2. Sensor signal (output signal) 3. ...
When the exhaust is rich, the output of a zirconia oxygen sensor is above 450 mV.
The throttle pedal is connected to the accelerator pedal position (APP) sensor. The electronic ...