This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: What is the output voltage from an RL integrator that uses a 10 mH inductor, a 10 resistor and a 16 ... (Read 51 times)

stevenposner

  • Hero Member
  • *****
  • Posts: 608
on: Jul 28, 2018
What is the output voltage from an RL integrator that uses a 10 mH inductor, a 10  resistor and a 16 V, 1 ms input pulse?
 
  A) 13.8 V B) 10.1 V C) 16.3 V D) 15.2 V

Question 2

The capacitor of an RC integrator charges to ________ if the input is a 10 V pulse with a pulse width equal to one time constant.
 
  A) 3.7 VC B) 10 V C) 6.3 V D) 5 V


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

amit

  • Sr. Member
  • ****
  • Posts: 364
Reply #1 on: Jul 28, 2018
Answer to Question 1

B

Answer to Question 2

C


stevenposner

  • Member
  • Posts: 608
Reply 2 on: Jul 28, 2018
Excellent

Mochi

  • Member
  • Posts: 300
Reply 3 on: Yesterday
:D TYSM

« previous next »
 

Did you know?

Eating food that has been cooked with poppy seeds may cause you to fail a drug screening test, because the seeds contain enough opiate alkaloids to register as a positive.

Did you know?

As many as 20% of Americans have been infected by the fungus known as Histoplasmosis. While most people are asymptomatic or only have slight symptoms, infection can progress to a rapid and potentially fatal superinfection.

Did you know?

Cancer has been around as long as humankind, but only in the second half of the twentieth century did the number of cancer cases explode.

Did you know?

The first successful kidney transplant was performed in 1954 and occurred in Boston. A kidney from an identical twin was transplanted into his dying brother's body and was not rejected because it did not appear foreign to his body.

Did you know?

People with alcoholism are at a much greater risk of malnutrition than are other people and usually exhibit low levels of most vitamins (especially folic acid). This is because alcohol often takes the place of 50% of their daily intake of calories, with little nutritional value contained in it.

Current Resistance and Voltage Current Resistance and Voltage
Using a scan tool to check battery voltage. Using a scan tool to check battery voltage.
The primary ignition system is used to trigger and therefore create the secondary (high-voltage) ... The primary ignition system is used to trigger and therefore create the secondary (high-voltage) ...
MAP sensors use three wires: 1.5 volt reference from the PCM 2. Sensor signal (output signal) 3. ... MAP sensors use three wires: 1.5 volt reference from the PCM 2. Sensor signal (output signal) 3. ...
When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ... When the O2S voltage rises above 450 mV, the PCM starts to control the fuel mixture based on ...
Role of Productivity in Determining Output per Worker, 2009 Role of Productivity in Determining Output per Worker, 2009
Video: Fermentation pathways

For a complete list of videos, visit our video library