Which of the following is NOT a correct step in the replacement of RLL with PLC ladder logic?
A) In an on-delay conversion, replace the NO timed contact with an XIC instruction addressed with the done bit of the PLC timer. In an off-delay conversion, replace the NO timed contact with an XIO instruction addressed with the done bit of the PLC timer.
B) Replace the on-delay relay timer (NO timed closed type) with a TON PLC timer. Replace the off-delay relay timer (NO timed open type) with a TOF PLC timer.
C) Select the time base so that the timing resolution meets the requirements of the application.
D) Select the preset value so that the product of the time base and the preset value equal the delay time value.
Question 2
In data handling, words are also referred to as ________.
A) Blocks B) Arrays C) Tables D) Registers
Documenting the health history is a crucial step in providing patient care
The conduction system of the heart; traces the path of the electrical impulse that stimulates the he
Ten-step pathway for de novo synthesis of IMP
Logic of the 10% brain myth
Step 1 is to verify the customer concern or problem. If the problem cannot be verified, then the ...
Ladder with weights