After a TP sensor has been tested using the min/max function on a ...

[bclement10]

After a TP sensor has been tested using the min/max function on a DMM, a reading of 5 volts is displayed.
What does this reading indicate?
◦ The TP sensor is open at one point during the test
◦ The TP sensor is shorted
◦ The TP sensor signal is shorted to 5-volt reference
◦ Both B and C are possible

[jomama]

Both B and C are possible

[bclement10]

TYSM

[amynguyen1221]

Thanks for the timely response, appreciate it