This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: Two technicians are diagnosing a poorly running engine with no stored DTCs. When the MAF sensor is ... (Read 41 times)

NguyenJ

  • Hero Member
  • *****
  • Posts: 516
on: Aug 13, 2021

Question 1

The typical MAF reading on a scan tool with the engine at idle speed and normal operating temperature is ________.
◦ 1 to 3 grams per second
◦ 3 to 7 grams per second
◦ 8 to 12 grams per second
◦ 14 to 24 grams per second

Question 2

Two technicians are diagnosing a poorly running engine with no stored DTCs. When the MAF sensor is unplugged, the engine runs better. Technician A says that this means the MAF is supplying incorrect air flow information to the PCM. Technician B says that this indicates the PCM is defective. Who is right?
◦ Technician A only
◦ Technician B only
◦ Both technicians A and B
◦ Neither technician A nor B
Automotive Technology ¦ Halderman ¦ 5th Edition
Buy Test-Bank


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by NguyenJ on Aug 13, 2021

macmac

  • Sr. Member
  • ****
  • Posts: 343
Reply #1 on: Aug 13, 2021
Lorsum iprem. Lorsus sur ipci. Lorsem sur iprem. Lorsum sur ipdi, lorsem sur ipci. Lorsum sur iprium, valum sur ipci et, vala sur ipci. Lorsem sur ipci, lorsa sur iprem. Valus sur ipdi. Lorsus sur iprium nunc, valem sur iprium. Valem sur ipdi. Lorsa sur iprium. Lorsum sur iprium. Valem sur ipdi. Vala sur ipdi nunc, valem sur ipdi, valum sur ipdi, lorsem sur ipdi, vala sur ipdi. Valem sur iprem nunc, lorsa sur iprium. Valum sur ipdi et, lorsus sur ipci. Valem sur iprem. Valem sur ipci. Lorsa sur iprium. Lorsem sur ipci, valus sur iprem. Lorsem sur iprem nunc, valus sur iprium.
Answer Preview
Only 29% of students answer this correctly


NguyenJ

  • Member
  • Posts: 516
Reply 2 on: Aug 13, 2021
Excellent

Laurenleakan

  • Member
  • Posts: 309
Reply 3 on: Yesterday
Great answer, keep it coming :)

« previous next »
 

Did you know?

The first war in which wide-scale use of anesthetics occurred was the Civil War, and 80% of all wounds were in the extremities.

Did you know?

The Centers for Disease Control and Prevention has released reports detailing the deaths of infants (younger than 1 year of age) who died after being given cold and cough medications. This underscores the importance of educating parents that children younger than 2 years of age should never be given over-the-counter cold and cough medications without consulting their physicians.

Did you know?

Medication errors are more common among seriously ill patients than with those with minor conditions.

Did you know?

Adults are resistant to the bacterium that causes Botulism. These bacteria thrive in honey – therefore, honey should never be given to infants since their immune systems are not yet resistant.

Did you know?

Urine turns bright yellow if larger than normal amounts of certain substances are consumed; one of these substances is asparagus.

When the engine is cold, the coolant flows through the bypass. When the engine is cold, the coolant flows through the bypass.
A typical engine design that uses both pressure and splash lubrication. Oil travels under pressure ... A typical engine design that uses both pressure and splash lubrication. Oil travels under pressure ...
A rapidly vibrating needle at idle that becomes steady as engine speed is increased indicates worn ... A rapidly vibrating needle at idle that becomes steady as engine speed is increased indicates worn ...
To help locate how far the engine is being rotated, the technician is removing the distributor cap ... To help locate how far the engine is being rotated, the technician is removing the distributor cap ...
In a multiair engine design, the exhaust valves are opened by the exhaust camshaft lobes. Intake ... In a multiair engine design, the exhaust valves are opened by the exhaust camshaft lobes. Intake ...
Start the vehicle’s engine and let run at 1000–1500 RPM. The engine is now running on fuel ... Start the vehicle’s engine and let run at 1000–1500 RPM. The engine is now running on fuel ...
Video: Types of Burns

For a complete list of videos, visit our video library