Skills and Trades

Which of the following may also be linked to the transmission?

Started by Mollykgkg

What is the purpose of the detent mechanism?

Started by tfester

What is the output when a small gear drives a larger gear?

Started by torybrooks

What is the most commonly used synchronizer?

Started by faduma

What is the effect of placing an idler gear between the driving gear and the driven gear?

Started by Coya19@aol.com

What is a function of the synchronizer blocking ring?

Started by Arii_bell

What does the pinion gear mesh with in the transaxle?

Started by fasfsadfdsfa

What are the most commonly used transmission and transaxle designs?

Started by panfilo

What movement occurs inside a transmission when the vehicle is stopped and the transmission is in neutral?

Started by javeds

What determines whether a conventional transmission or transaxle is used?

Started by mp14

Identify three advantages of an overdrive gear ratio being used in a vehicle.

Started by washai

Explain the role of shift rails and shift forks in the operation of transmissions and transaxles.

Started by geodog55

Until recently, some clutch discs were made with asbestos.

Started by viki

The fluid level in the hydraulic clutch master cylinder reservoir fluid should be approximately 6 to ...

Started by melina_rosy

Clutch slippage occurs when the clutch disc is not gripped firmly between the flywheel and the pressure plate.

Started by BRWH

Chatter is caused by liquid contaminants on the friction surfaces.

Started by brutforce

The pressure plate moves away from the flywheel when the clutch pedal is ____________________.

Started by casperchen82

The bell housing is often called a(n) ____________________ housing.

Started by saliriagwu

Insufficient ____________________ can prevent the clutch from completely engaging.

Started by abarnes

A clutch facing must be able to withstand the heat generated by the friction between the ...

Started by Mimi

____________________ fluid is often used as the hydraulic fluid in hydraulic clutch systems.

Started by meagbuch

With which component does the clutch friction disc always rotate?

Started by mrsjacobs44

While depressing the clutch pedal it feels soft or spongy, and it is difficult to get the vehicle ...

Started by leilurhhh

Which part should be resurfaced every time a new clutch disc and/or pressure plate is replaced?

Started by Ebrown

Which of the following would be considered a driving member of the clutch assembly?

Started by SGallaher96