The first step in brake drum removal is to:
A) Remove the master cylinder cover to bleed off hydraulic pressure
B) Mark the drum R or L
C) Loosen the parking brake cable
D) Remove the drum retaining device
Question 2
Technician A says that when repairing brakes, it is a good practice to inspect the backing plate for a bent or cracked structure. Technician B says that the pads of the backing plate should be lubricated with heavy grease before installing new shoes. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Herbert Bayer, Cover for Bauhaus 1.
A step stool can be used to assess the ability to use steps.
The exhaust gases are pushed out of the cylinder by the piston on the exhaust stroke.
The lower intake manifold attaches to the cylinder heads.
Cover and secure the cold source in place. Wrap the cold source using a towel or elastic bandage to ...
Remove cold source, and check the knee for changes. Notice skin color and changes in swelling around ...