The first step in brake drum removal is to:
A) Remove the master cylinder cover to bleed off hydraulic pressure
B) Mark the drum R or L
C) Loosen the parking brake cable
D) Remove the drum retaining device
Question 2
Technician A says that when repairing brakes, it is a good practice to inspect the backing plate for a bent or cracked structure. Technician B says that the pads of the backing plate should be lubricated with heavy grease before installing new shoes. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Running time on 100-meter sprint for men and women master athletes increases with age. Source: Korho
Biology Forums - Master Your Courses (2017 Edition)
Reinstall the valve cover being careful to not pinch a wire or vacuum hose between the cover and ...
Remove the fuel injector cleaning canister’s top and regulator assembly. Note that there is an ...
Step 8 is very important. Be sure that the customer’s concern has been corrected.
Place the infant faceup on a soft surface, such as a towel, and remove his or her clothing. With one ...