The first step in brake drum removal is to:
A) Remove the master cylinder cover to bleed off hydraulic pressure
B) Mark the drum R or L
C) Loosen the parking brake cable
D) Remove the drum retaining device
Question 2
Technician A says that when repairing brakes, it is a good practice to inspect the backing plate for a bent or cracked structure. Technician B says that the pads of the backing plate should be lubricated with heavy grease before installing new shoes. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Dred Scott and his wife and children are featured on the cover of Frank Leslie’s Illustrated Newspap
The downward movement of the piston draws the air–fuel mixture into the cylinder through the ...
Inline four-cylinder engine showing principal and nonprincipal ends. Normal direction of rotation is ...
Using a vacuum hose and a grounded test light to ground one cylinder at a time on a DIS. This works ...
Step 1 is to verify the customer concern or problem. If the problem cannot be verified, then the ...
Ocean cover most of Earth’s surface