A diagnostic trouble code (DTC) has been set for a fault with the lateral acceleration sensor or circuit. What test could be performed to check if the sensor is working?
A) Disconnect the sensor and hold it sideways to see if the scan tool reads 1.0 G
B) Drive the vehicle in a circle to see if the scan tool reads 0.0 G
C) Disconnect the sensor and hold it sideways to see if the scan tool reads 0.0 G
D) Unplug it and see if the scan tool reads 1.0 G
Question 2
Technician A says that the alignment sensor heads only need to be calibrated once per day. Technician B says that the alignment sensor heads should be compensated every time they are mounted on a wheel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Bones of the Face and Skull (Lateral View)
Select the Preliminary Code(s)
Procedures and Diagnostic Tests Related to the Male Reproductive System
A typical heated zirconia oxygen sensor, showing the sensor signal circuit that uses the outer ...
Fingertip rake over sternum and pectoralis muscles from midline to lateral chest. Adjust for women. ...
The Vertebral Column. Note the Four Curvatures of the Spine in the Right Lateral View