A diagnostic trouble code (DTC) has been set for a fault with the lateral acceleration sensor or circuit. What test could be performed to check if the sensor is working?
A) Disconnect the sensor and hold it sideways to see if the scan tool reads 1.0 G
B) Drive the vehicle in a circle to see if the scan tool reads 0.0 G
C) Disconnect the sensor and hold it sideways to see if the scan tool reads 0.0 G
D) Unplug it and see if the scan tool reads 1.0 G
Question 2
Technician A says that the alignment sensor heads only need to be calibrated once per day. Technician B says that the alignment sensor heads should be compensated every time they are mounted on a wheel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Lateral Geniculate Nucleus
A magnetic sensor uses a permanent magnet surrounded by a coil of wire. The notches of the ...
A platinum tipped spark plug that is fuel soaked indicating a fault with the fuel system or the ...
The post-catalytic converter oxygen sensor should display very little activity if the catalytic ...
Effleurage along cervical and upper trapezius muscles from occiput to shoulder. Hold head in lateral ...
The two visual fields of each eye are nasal (medial) and temporal (lateral)