A diagnostic trouble code (DTC) has been set for a fault with the lateral acceleration sensor or circuit. What test could be performed to check if the sensor is working?
A) Disconnect the sensor and hold it sideways to see if the scan tool reads 1.0 G
B) Drive the vehicle in a circle to see if the scan tool reads 0.0 G
C) Disconnect the sensor and hold it sideways to see if the scan tool reads 0.0 G
D) Unplug it and see if the scan tool reads 1.0 G
Question 2
Technician A says that the alignment sensor heads only need to be calibrated once per day. Technician B says that the alignment sensor heads should be compensated every time they are mounted on a wheel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The Human Genetic Code
Procedures and Diagnostic Tests Related to the Cardiovascular System
Corroded terminals on a waste-spark coil can cause misfire diagnostic trouble codes to be set.
A backpressure tool can be made by using an oxygen sensor housing and using epoxy or braze to hold ...
Stretch neck in lateral flexion. Place one hand on the head and the other hand on the shoulder and ...
A Strike-Slip Fault