The first step in brake drum removal is to:
A) Remove the master cylinder cover to bleed off hydraulic pressure
B) Mark the drum R or L
C) Loosen the parking brake cable
D) Remove the drum retaining device
Question 2
Technician A says that when repairing brakes, it is a good practice to inspect the backing plate for a bent or cracked structure. Technician B says that the pads of the backing plate should be lubricated with heavy grease before installing new shoes. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
Graphic display of hypothetical results of a predator removal experiment.
Compression ratio is the ratio of the total cylinder volume (when the piston is at the bottom of ...
Remove all jewelry before performing service work on any vehicle.
A typical two-step ECT circuit showing that when the coolant temperature is low, the PCM applies a ...
Remove the heat source, and check the skin for redness. Massage the area, and notice muscle ...
Remove cold source, and check the knee for changes. Notice skin color and changes in swelling around ...