This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: When soldering 1-1/2 tubing in a horizontal position, you should _____. a. feed the solder from a ... (Read 36 times)

melina_rosy

  • Hero Member
  • *****
  • Posts: 531
on: Jul 24, 2018
When soldering 1-1/2 tubing in a horizontal position, you should _____.
 
  a. feed the solder from a single point
  b. start feeding solder at the top and work down
  c. start feeding solder near the bottom and work up
  d. turn the assembly to the vertical position first

Question 2

Which of these actions is taken to prevent over-pressurizing the torch hoses during equipment setup?
 
  a. Opening the tank valve slowly.
  b. Turning the regulator adjusting screw counterclockwise (out).
  c. Turning the regulator adjusting screw clockwise (in).
  d. Installing flashback arrestors.


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

joneynes

  • Sr. Member
  • ****
  • Posts: 376
Reply #1 on: Jul 24, 2018
Answer to Question 1

c

Answer to Question 2

b


melina_rosy

  • Member
  • Posts: 531
Reply 2 on: Jul 24, 2018
Wow, this really help

ashely1112

  • Member
  • Posts: 347
Reply 3 on: Yesterday
Thanks for the timely response, appreciate it

« previous next »
 

Did you know?

Only one in 10 cancer deaths is caused by the primary tumor. The vast majority of cancer mortality is caused by cells breaking away from the main tumor and metastasizing to other parts of the body, such as the brain, bones, or liver.

Did you know?

Limit intake of red meat and dairy products made with whole milk. Choose skim milk, low-fat or fat-free dairy products. Limit fried food. Use healthy oils when cooking.

Did you know?

Children with strabismus (crossed eyes) can be treated. They are not able to outgrow this condition on their own, but with help, it can be more easily corrected at a younger age. It is important for infants to have eye examinations as early as possible in their development and then another at age 2 years.

Did you know?

More than 2,500 barbiturates have been synthesized. At the height of their popularity, about 50 were marketed for human use.

Did you know?

ACTH levels are normally highest in the early morning (between 6 and 8 A.M.) and lowest in the evening (between 6 and 11 P.M.). Therefore, a doctor who suspects abnormal levels looks for low ACTH in the morning and high ACTH in the evening.

Assessing Palpebral Conjunctiva, Patient Position Assessing Palpebral Conjunctiva, Patient Position
The anatomical position: standing erect, gazing straight ahead, arms down at sides, palms facing for The anatomical position: standing erect, gazing straight ahead, arms down at sides, palms facing for
Cylinder 1 slit signals the computer the piston position for cylinder 1. The 1-degree slits provide ... Cylinder 1 slit signals the computer the piston position for cylinder 1. The 1-degree slits provide ...
Position of shunt to drain fluid in hydrocephalus. Position of shunt to drain fluid in hydrocephalus.
Stretch shoulder in horizontal flexion by grasping at the forearm and reaching the entire arm across ... Stretch shoulder in horizontal flexion by grasping at the forearm and reaching the entire arm across ...
The horizontal phase shift of the resultant graph is The horizontal phase shift of the resultant graph is
Video: Dorsal Recumbent Position

For a complete list of videos, visit our video library