This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: When soldering 1-1/2 tubing in a horizontal position, you should _____. a. feed the solder from a ... (Read 79 times)

melina_rosy

  • Hero Member
  • *****
  • Posts: 531
on: Jul 24, 2018
When soldering 1-1/2 tubing in a horizontal position, you should _____.
 
  a. feed the solder from a single point
  b. start feeding solder at the top and work down
  c. start feeding solder near the bottom and work up
  d. turn the assembly to the vertical position first

Question 2

Which of these actions is taken to prevent over-pressurizing the torch hoses during equipment setup?
 
  a. Opening the tank valve slowly.
  b. Turning the regulator adjusting screw counterclockwise (out).
  c. Turning the regulator adjusting screw clockwise (in).
  d. Installing flashback arrestors.


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

joneynes

  • Sr. Member
  • ****
  • Posts: 376
Reply #1 on: Jul 24, 2018
Answer to Question 1

c

Answer to Question 2

b


melina_rosy

  • Member
  • Posts: 531
Reply 2 on: Jul 24, 2018
Excellent

adammoses97

  • Member
  • Posts: 337
Reply 3 on: Yesterday
:D TYSM

« previous next »
 

Did you know?

Elderly adults are at greatest risk of stroke and myocardial infarction and have the most to gain from prophylaxis. Patients ages 60 to 80 years with blood pressures above 160/90 mm Hg should benefit from antihypertensive treatment.

Did you know?

Nearly 31 million adults in America have a total cholesterol level that is more than 240 mg per dL.

Did you know?

Intradermal injections are somewhat difficult to correctly administer because the skin layers are so thin that it is easy to accidentally punch through to the deeper subcutaneous layer.

Did you know?

Each year in the United States, there are approximately six million pregnancies. This means that at any one time, about 4% of women in the United States are pregnant.

Did you know?

The training of an anesthesiologist typically requires four years of college, 4 years of medical school, 1 year of internship, and 3 years of residency.

Range of Motion of the Hip Joint, Position of the Leg for Full External Rotation Range of Motion of the Hip Joint, Position of the Leg for Full External Rotation
Thymus gland. (A) Appearance and position; (B) with anatomic structures. Thymus gland. (A) Appearance and position; (B) with anatomic structures.
Cylinder 1 slit signals the computer the piston position for cylinder 1. The 1-degree slits provide ... Cylinder 1 slit signals the computer the piston position for cylinder 1. The 1-degree slits provide ...
Semireclining position for massage for the elderly. Semireclining position for massage for the elderly.
Hand position for the cradle. Overlap the last three fingers of your left hand on the last three ... Hand position for the cradle. Overlap the last three fingers of your left hand on the last three ...
Reverse tailor position Reverse tailor position
Video: Phases of mitosis

For a complete list of videos, visit our video library