An air conditioner with a thermostatic expansion valve is operating with a condenser saturation temperature of 110F and a liquid-line temperature of 85F. The factory-specified subcooling for the current operating condition is 10F. After checking the condenser coil and airflow, the technician should:
A) Add charge because the system is undercharged.
B) Leave the charge alone because it is cooling even better than factory specifications.
C) Move some of the charge from the low side of the system to the high side of the system to balance the charge.
D) Recover charge because the system is overcharged.
Question 2
Capacitance meters measure the capacitance in a circuit or in a start capacitor. This is measured in what unit?
A) Amps B) Ohms C) Microfarads D) Volts
Valve replacement surgery.
An overall view of the four-cylinder engine that is due for a scheduled valve adjustment according ...
If the thermostat has a jiggle valve, it should be placed toward the top to allow air to escape. If ...
Start the valve adjustment procedure by first disconnecting and labeling, if necessary, all ...
Air flows through the PCV valve during idle, cruising, and light-load conditions.
Palpation for respiratory expansion