An air conditioner with a thermostatic expansion valve is operating with a condenser saturation temperature of 110F and a liquid-line temperature of 85F. The factory-specified subcooling for the current operating condition is 10F. After checking the condenser coil and airflow, the technician should:
A) Add charge because the system is undercharged.
B) Leave the charge alone because it is cooling even better than factory specifications.
C) Move some of the charge from the low side of the system to the high side of the system to balance the charge.
D) Recover charge because the system is overcharged.
Question 2
Capacitance meters measure the capacitance in a circuit or in a start capacitor. This is measured in what unit?
A) Amps B) Ohms C) Microfarads D) Volts
American women operating machine lathes in a munitions factory.
A variable valve timing solenoid being controlled by applying voltage from the PCM.
Weak valve springs will produce a normal reading at idle, but as engine speed increases, the needle ...
A PCV valve shown in a cutaway valve cover showing the baffles that prevent liquid oil from being ...
PCV valve operation in the event of a backfire.
Expansion Ratios for Liquefied Compressed Gases