This topic contains a solution. Click here to go to the answer
« previous next »

Author Question: If the tungsten electrode touches the filler metal during welding, the welder must _____. a. ... (Read 114 times)

segrsyd

  • Hero Member
  • *****
  • Posts: 530
on: Jul 24, 2018
If the tungsten electrode touches the filler metal during welding, the welder must _____.
 
  a. remove and clean the electrode
  b. discard the electrode
  c. increase the push angle
  d. touch the electrode to the weld puddle

Question 2

Another common name for lineman pliers is _____.
 
  a. locking pliers
  b. tongue-and-groove pliers
  c. needle-nose pliers
  d. side cutter


Related Topics

Need homework help now?

Ask unlimited questions for free

Ask a Question
Marked as best answer by a Subject Expert

chereeb

  • Sr. Member
  • ****
  • Posts: 326
Reply #1 on: Jul 24, 2018
Answer to Question 1

a

Answer to Question 2

d


segrsyd

  • Member
  • Posts: 530
Reply 2 on: Jul 24, 2018
Thanks for the timely response, appreciate it

elyse44

  • Member
  • Posts: 319
Reply 3 on: Yesterday
Excellent

« previous next »
 

Did you know?

The shortest mature adult human of whom there is independent evidence was Gul Mohammed in India. In 1990, he was measured in New Delhi and stood 22.5 inches tall.

Did you know?

You should not take more than 1,000 mg of vitamin E per day. Doses above this amount increase the risk of bleeding problems that can lead to a stroke.

Did you know?

Serum cholesterol testing in adults is recommended every 1 to 5 years. People with diabetes and a family history of high cholesterol should be tested even more frequently.

Did you know?

Though “Krazy Glue” or “Super Glue” has the ability to seal small wounds, it is not recommended for this purpose since it contains many substances that should not enter the body through the skin, and may be harmful.

Did you know?

Your chance of developing a kidney stone is 1 in 10. In recent years, approximately 3.7 million people in the United States were diagnosed with a kidney disease.

Cardiac pacemaker. The pacemaker device is implanted beneath the skin near the heart, and the electr Cardiac pacemaker. The pacemaker device is implanted beneath the skin near the heart, and the electr
A typical hacksaw that is used to cut metal. If cutting sheet metal or thin objects, then use a ... A typical hacksaw that is used to cut metal. If cutting sheet metal or thin objects, then use a ...
A close-up showing the recessed center electrode on a spark tester. It is recessed 3/8 inch into ... A close-up showing the recessed center electrode on a spark tester. It is recessed 3/8 inch into ...
A 400-g piece of metal at 120°C is dropped into a cup containing 450 g of water A 400-g piece of metal at 120°C is dropped into a cup containing 450 g of water
If 1.823 g of cobalt metal reacts with 0.495 g of oxygen gas, what is the empiri If 1.823 g of cobalt metal reacts with 0.495 g of oxygen gas, what is the empiri
Standard Electrode Potentials at 25 Degrees Standard Electrode Potentials at 25 Degrees
Video: Control of ventilation rate by other brain centers (posts, hypothalamus & cerebral cortex)

For a complete list of videos, visit our video library