When using a meter with a manual scale setting always: A) ...

[ghost!]

When using a meter with a manual scale setting always:
 
  A) Start with the lowest scale and work up to get an accurate reading.
  B) Start with the highest scale and work down to get an accurate reading.
  C) Set the scale based on what you expect the reading to be.
  D) The scale setting does not affect the reading.

Question 2

An ohm meter is set on continuity and beeps when the leads are connected to a circuit. This indicates that:
 
  A) The circuit path is complete. B) The circuit has a high resistance.
  C) The circuit is not grounded. D) The circuit is broken.

[lkanara2]

Answer to Question 1

B

Answer to Question 2

A

[ghost!]

Thank you!

[lkanara2]

Always glad to help...