Answer to Question 1
Schematics commonly have some part of the diagram arranged to represent a part of the unit. For example, many schematics have the thermostat connections or unit terminal board connections drawn in the schematic in the same order and arrangement as in the unit.
Answer to Question 2
The method used is as follows:
Step 1 Measure the dry-bulb temperature of the air entering the condenser. (We will refer to this as the EAT Entering Air Temperature).
Step 2 Measure the system's operating suction pressure.
Step 3 Using a Pressure/Temperature (P/T) chart, convert the suction pressure to its equivalent saturation temperature.
Step 4 Determine the system's application: low temperature, medium temperature, or high temperature. A low temperature system is one that operates at an evaporating temperature of 0F and below. A medium temperature system is one that operates at an evaporating temperature of between 0F and 25F. A high temperature system is one that operates at an evaporating temperature of between 25F and 45F.
Step 5 Using the chart below, determine the appropriate Temperature Rise (TR). The TR is the difference between the EAT and the condensing temperature of the refrigerant in the condenser.
Step 6 The Condensing Temperature
Schematic depiction of the hydrophobic effect
Schematic representation of protein structure.
Adapoids and omomyoids had longer snouts and are the first “true” primates.
Schematic diagram of the CSTR
C1qrs. A schematic of C1 showing structure and C1q, r, and s.
Schematic view of a replication fork